Table of contents:
- Reset mobile networks settings
- Insert the SIM card into another slot
- Activate data roaming
- Do you have a case on your mobile? Could be the problem
- Change network mode
One of the biggest problems in Samsung mobiles has to do with mobile line coverage. The signal is not very good, even in outdoor conditions where there is an acceptable level of coverage, if we compare it with other models. Possibly it is a problem of the antennas that Samsung uses in its mobiles, but there are different ways to solve it. We tell you how.
First of all, it is important to check if the low coverage is due to your Samsung mobile or the area. You can check it by putting the SIM card in another device. Or, consulting the coverage map of your operator. If you see that the level is lower than it should be, follow the steps below.
Reset mobile networks settings
First, reset the network settings. This will reset the wireless settings to factory settings. Don't worry, you won't lose your phone data, but you will have to enter the passwords of the different WiFi networks, as well as the paired Bluetooth devices and the data settings of your operator.
To reset, go to Settings> General management> Reset> Reset network settings. Click on the button that says 'Reset settings'. Then confirm the PIN of your device and click on 'Reset' again. In a few seconds a warning will appear that the data has been reset. Restart the mobile. Wait a few minutes and see if the signal has grown.
Insert the SIM card into another slot
If your Samsung mobile is dual SIM and you only have one card, try inserting the slot in the other tray. Maybe this way you will get more coverage. To remove the tray you only need the extractor key that comes in the box. Or, a small paper clip.
Activate data roaming
If you live in the European Union, you can keep data roaming turned on. This is disabled by default on Samsung phones, and can make us gain a little more coverage. To activate it, go to Settings> Connections> Mobile networks> Data roaming. Activate this option.
Do you have a case on your mobile? Could be the problem
You should bear in mind that some mobile phone cases cause the network signal to decrease. Therefore, if you have a case on your mobile with metal components, it may be affecting the coverage. Take it off and check after a few minutes if the level has risen.
Change network mode
This option is perfect for those who need coverage for calls. It is about deactivating the connection of 4G networks automatically, and applying the 3G network. This means that, while this option is active, we will not be able to enjoy a 4G connection. However, we will see how the signal increases. To make this change, go to Settings> Connections> Mobile networks> Network mode. Select 3G Only. After a couple of minutes you will see how the coverage bar grows considerably.
If you want to activate the 4G connection again, follow the same steps and check the first option that appears on the list.
